SunCure EC OEM Wash is a FOGRA complaint wash approved for use on manroland and Heidelberg presses with energy curable inks.The blend of solvents has excellent ink cutting ability, does not leave an oily residue, and this wash has the required corrosion protection for FOGRA approval.

Typical characteristics and features

Formulated to have the following properties:

• Fast drying

• EPDM safe

• FOGRA approved

physical properties:

• Flash point: 141°F (61°C)

application recommendation

directions

Use straight (neat)

Hand wash – Generously coat cloth or rag with wash

and wipe surface until clean

Rollers – Apply directly into roller train, allowing

mixture to loosen ink, then engage the wash up blade

until all residues are removed

Metering Roller Cleaners are specially formulated solvents used to  clean lithographic printing press rubber rollers within the dampening system. Specially designed to remove ink, glaze, grease and other contaminants from the rubber metering and pan rollers.  Creating a  surface that is more resilient and water-receptive.

Typical Characteristics and Features
Rycoline MRC is formulated to have the following properties:
• Fast drying
• Deep cleaning

Water Miscibility
For use: apply Rycoline MRC straight (undiluted) for desired results.
directions
Apply Rycoline MRC directly with a cloth to clean all water system
rollers.

Ink Suitability
Rycoline MRC is for use with conventional heat-set and cold-set inks.

Sun Chemical Rycoline®

Suncure EC Wash 100 is a non-water miscible formulation of solvents blended to effectively remove UV inks from

rollers and blankets.

typical characteristics and features

Formulated to have the following properties:

• Fast Drying

• Excellent ink cutting

Ink Suitability

Suncure EC Wash 100 is designed for use with all energy curable ink

applications.

technical information and handling

Energy curable wash selection

clean-up precautions.

See Material Safety Data Sheet for clean up of spills and personal

storage considerations

Do not freeze. When stored in the original unopened container, the

Suncure EC Wash 100 has a one (1) year shelf-life from date of

manufacture.

Physical properties:

• Flash point: 141F / 61C

• VOC’s: 100%

• HMIS 2-2-0

application recommendation

Directions

FOR ROLLERS: Apply wash generously into roller train allowing

wash to work into rollers. Engage wash-up blade to remove all

ink and residue. Repeat as needed.

FOR BLANKETS: Apply wash generously onto cloth and wipe

entire area of blanket with an even sweeping motion. If

needed, dry with secondary cloth.

Application equipment

Manually applied with cloth or sponge

Safety, health and environment

Rycoline Suncure EC Wash 100 is to be used in accordance with

normal standards of industrial hygiene and good manufacturing

practice. Please refer to the supplied Material Safety Data Sheet for

specific information. Material Safety Data Sheets will be supplied.

Printing inks, coatings and printing residues should be disposed of in