SunCure EC OEM Wash is a FOGRA complaint wash approved for use on manroland and Heidelberg presses with energy curable inks.The blend of solvents has excellent ink cutting ability, does not leave an oily residue, and this wash has the required corrosion protection for FOGRA approval.

Typical characteristics and features

Formulated to have the following properties:

• Fast drying

• EPDM safe

• FOGRA approved

physical properties:

• Flash point: 141°F (61°C)

application recommendation

directions

Use straight (neat)

Hand wash – Generously coat cloth or rag with wash

and wipe surface until clean

Rollers – Apply directly into roller train, allowing

mixture to loosen ink, then engage the wash up blade

until all residues are removed

Superior Black to Make your Forms and Line Work Pop!

Sun Relay Dense Black Offset Printing Process ink:

Sun Relay Dense Black Offset Process Ink like all Sun Chemical process inks are in-line aqueous coat-able and set quickly producing a hard rub resistant ink film.

SunLit Intense inks are formulated to have the following properties:

• Solid lithographic performance

• Abrasion resistance

• Fast setting

• Fast drying

• Wide water window

• High transfer for plate and blankets

• Renewable, bio-based materials

• Laser-able*

• Offline UV coatable*

Process Colors**

technical information and ink handling

Physical properties

Volatile organic compound (VOC) content* = 1%

Vegetable oil content = 40 – 42

Average soybean oil content** = 24%

*Based upon EPA Method 24 protocol, +2% accuracy.

**American Soybean Association approved.

Note: The above products are available in a variety of packaging.

Please contact your local Sun Chemical representative for SAP numbers.

**For any post printing processes an adequate ink drying time must be slowed

(minimum 48 hours) depending on ink coverage and type of stock. Each printing facility

should be fully tested on all inks and coatings under their own specific press conditions to

identify any limitations. For offline UV coatability it is strongly recommended an to use aqeuous

primer to be used over inks to help promote best results.

Press considerations

Plates should be tested prior to anypress or printing application to ensure they meet the specific production

requirements of each printing facility.

Intense Performs best on uncoated substrates and substrates that will receive inline or offline coating.

Performs well on uncoated stock on forms presses.

Sun Finshed Sheetfed blending bases are formulated to have the
following properties:
• Meets low mineral oil content requirements
• Do not contain BPA based chemicals
• Nestle compliant for secondary food packaging applications when
applied and dried properly
• Fluorescent and metallic toners available
• Wide water tolerance
• Fast setting
• Abrasion resistant
• Improved spot color mileage
• Environmentally friendly
• Aqueous and offline UV coatable

Sun Chemical Rycoline®

Suncure EC Wash 100 is a non-water miscible formulation of solvents blended to effectively remove UV inks from

rollers and blankets.

typical characteristics and features

Formulated to have the following properties:

• Fast Drying

• Excellent ink cutting

Ink Suitability

Suncure EC Wash 100 is designed for use with all energy curable ink

applications.

technical information and handling

Energy curable wash selection

clean-up precautions.

See Material Safety Data Sheet for clean up of spills and personal

storage considerations

Do not freeze. When stored in the original unopened container, the

Suncure EC Wash 100 has a one (1) year shelf-life from date of

manufacture.

Physical properties:

• Flash point: 141F / 61C

• VOC’s: 100%

• HMIS 2-2-0

application recommendation

Directions

FOR ROLLERS: Apply wash generously into roller train allowing

wash to work into rollers. Engage wash-up blade to remove all

ink and residue. Repeat as needed.

FOR BLANKETS: Apply wash generously onto cloth and wipe

entire area of blanket with an even sweeping motion. If

needed, dry with secondary cloth.

Application equipment

Manually applied with cloth or sponge

Safety, health and environment

Rycoline Suncure EC Wash 100 is to be used in accordance with

normal standards of industrial hygiene and good manufacturing

practice. Please refer to the supplied Material Safety Data Sheet for

specific information. Material Safety Data Sheets will be supplied.

Printing inks, coatings and printing residues should be disposed of in

Sun Publish Ink from Sun Chemical delivers outstanding performance for high-volume, high-speed commercial offset printing. With vibrant color reproduction, superior press stability, and fast setting times, it’s the trusted choice for demanding printers.

Features:

• ✅ Bright, vibrant colors across all stocks

• ✅ Fast setting and excellent rub resistance

• ✅ Compatible with coated and uncoated papers

• ✅ Eco-conscious, low VOC formula

• ✅ Press-ready and compatible with most sheetfed presses

Ideal Applications:

• Retail inserts, catalogs, magazines, and commercial jobs

• Compatible with Heidelberg, Komori, Mitsubishi, and more

Need a custom PMS match? We offer fast turnaround on custom colors. Call 410‑340‑7958 or request a quote.